Episode notes
Written Guide: https://start9dave.substack.com/p/embassy-one-diy-guide
To Flash embassyOS On The SD card - https://start9.com/latest/user-manual/flashing
Parts list:
Geekworm NASPI v2.0 - https://geekworm.com/products/geekworm-naspi-2-5-sata-hdd-ssd-kit-for-raspberry-pi-4-model-b?_pos=2&_sid=06be31b61&_ss=r&variant=39426059731032
Raspberry Pi 4 (8GB recommended) - https://www.amazon.com/LANDZO-Raspberry-Pi-Model-8gb/dp/B08R87H4RR/
Internal SSD (1TB minimum) - https://www.amazon.com/Crucial-MX500-NAND-SATA-Internal/dp/B078211KBB
Micro SD Card (32GB) - https://www.amazon.com/dp/B07P14QHB7
Ethernet Cable (Cat5 or Cat6) - https://www.amazon.com/Monoprice-Flexboot-Ethernet-Patch-Cable/dp/B00AJHBZLM/
Speaker - https://www.amazon.com/Corporate-Computer-Motherboard-Internal-Speaker/dp/B01527H4W2/
2-Pin Male-to-Male Power Wire - https://geekworm.com/products/usb3-0-connector?variant=33744636674136
Optional (used in this guide):
Noctua NF-A4x10 5v Fan - https://www.amazon.com/Noctua-Cooling-Bearing-NF-A4X10-FLX-5V/dp/B00NEMGCIA/
2x Male-to-Female Jumper Wires - https://www.amazon.com/SinLoon-Breadboard-Arduino-Circuit-40-Pack/dp/B08M3QLL3Q/
SD card reader to flash embassyOS from your laptop/desktop if it has no reader
#bitcoin #sovereignty
